Gator Clean Rust Remover is effective in removing rust from the surface of concrete pavers, wet cast products & natural stones.

Gator Sealer Stripper is extremely effective for removing sealer from concrete paver or stone. It is a paste, it is easily applied with a brush, or roller. Gator Sealer Stripper is formulated to remain wet and effective over extended periods. Always preform a test area to determine exact reacting time. To use, apply to surfaces with a brush, roller according to test patch results. Once is ready to be removed use power washer to strip surface. Be sure to scrub remaining residue with nylon brush and water. Allow surfaces to air dry before resealing.

Gator Efflorescence Cleaner will remove any efflorescence stains trapped in the concrete pavers, wet cast products & natural stone pores. It will make the surface look more clean and vibrant without discoloring or damaging

the surface. This efflorescence cleaning is a necessary step before a sealer is applied. The sealer will be able to get a deeper penetration into the now clean pores.

Gator XP Oil and Grease Remover easily removes tough stains from motor oil, cooking oil, grease, wax, and more. Just shake it, spread it on the stain, let it dry, and sweep it off. Rinsing is needed if product has aged. Use it on concrete, brick, stone, composite decking, and more. Do not use on asphalt (blacktop). Gator XP Oil and Grease Remover is biodegradable and phosphate-free.

Gator Rubber, Paint & Tar Remover + is effective in removing rubber, oil-based paint and tar from the surface of concrete pavers, wet cast & natural stones. Can be use as a cleaning agent for tools when working with Gator Rock Bond or to re-emulsify any sealer type.

GATOR BLOCK BOND XP POLYURETHANE ADHESIVE, LOW VOC is one of the strongest polyurethane adhesives on the market. It is specially formulated for overlays, pool copings, steps and wall caps, concrete pavers, wet cast, natural stones, retaining walls, masonry units and bricks.

GATOR BLOCK BOND XP POLYURETHANE ADHESIVE, LOW VOC is formulated to provide a permanent bond in 24 hours to the above materials if properly installed.

Loctite PL 500 Landscape Block Adhesive is an exterior, heavy-duty, premium quality adhesive designed to meet any landscaping need.

Alliance Gator Nails are high quality nails which are available in lengths of 10" and 12" , common or spiral models. Gator nails are designed for use with Gator Edge.

Gator Edge Mini is made with 100 % Polyethylene. This will give it greater strength as well as provide good flexibility for pavers, natural stone and all types of slabs. It is easy to use and quick to install. Gator Edge Mini model for applications of 1" that can be used for natural stone, concrete and clay pavers and all type of slabs in walkways, patios, paths etc.

Gator Edge Flex and Rigid are made with 100% Polypropylene Copolymer. This will give it great strength as well as providing greater flexibility. We have a Rigid model which is ideal for straight applications and a Flex model that can be used for all curved applications such as walkways, paths, entrances etc. Both the Rigid and Flex can be locked together with the ‘’Twist & Lock’’ connection system. Finally, the Rigid could be transformed in a partial Flex by cutting the bridge support between each triangular angle.

For Use On

Gator Edge is an excellent choice to help define alleys, driveways or sidewalks.

Gator Edge is designed for straight or curved installation. It is especially easy to use and quick to install.

Gator XTreme Edge is the ultimate fiber-reinforced and polymer modified structural edge, which creates a strong and economical edging solution for any hardscape project. Gator XTreme Edge can be used on any traditional, permeable, Gator Base, or overlay application using concrete pavers and slabs or natural and wet cast stones. Gator XTreme Edge offers permanent continuous lateral support.

EASYJoint is the original sweep-in jointing Compound and still the best truly "All Weather Paving Joint Compound" available across the USA. Do not be fooled by others making similar claims. Azpects sells tens of thousands of tubs of EASYJoint every month to satisfied customers all over the United States, UK and Europe.

Gator Dust Bond is a unique mixture of polymer binders and calibrated stone available in Sahara Beige, Stone Grey. Once Gator Dust Bond sets, it becomes very firm and locks between the wetcast or natural stone joints while still retaining flexibility and providing a long lasting, durable jointing material. Gator Dust Bond is recommended for a variety of uses including pool decks, patios, footpaths, and any other pedestrian applications.

EUROSTONE BOND is the first polymeric sand specifically designed for natural stone. It can be used in an application of drainage and non-drainage base systems. It is perfect for stone roads, piazzas, driveways, pathways & stone apron driveways. This complete multi-purpose sand is available in four colors: Beige, Slate Grey, Ivory and Black Diamond.

Gator Tile Sand is a unique mixture of polymer binders and calibrated sand available in Beige, Slate Grey, Ivory and Black Diamond. Once Gator Tile Sand sets, it becomes very firm and locks between the porcelain tile joints while still retaining flexibility and providing a long lasting, durable jointing material. Gator Tile Sand is recommended for a variety of pedestrian uses including pool decks, patios, footpaths etc.This product is for use exclusively with the Gator Tile System and Gator Base. It is not for use with porcelain tile laid directly on concrete, or directly on an aggregate or sand base or bed.

Supersand Bond is a unique mixture of polymer binders and calibrated sand available in Beige, Slate Grey. The installation of Supersand Bond is almost identical to using regular paver joint sand except for the application of water. Once Supersand Bond sets, it becomes very firm and locks between the paver joints while still retaining flexibility and providing a long lasting, durable jointing material. Supersand Bond is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements etc.

GATOR MAXX SAND is a unique mixture of polymer binders and calibrated sand available in Beige and Slate Grey. The installation of GATOR MAXX SAND is almost identical to using regular paver joint sand except for the application of water. Once GATOR MAXX SAND sets, it becomes very firm and locks between the paver joints while still retaining flexibility and providing a long lasting, durable jointing material. GATOR MAXX SAND is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements etc. Ideal for concrete pavers, natural stones and wetcast prodcuts.

(FOR RESIDENTIAL APPLICATIONS)

SUPERSAND G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. No blower is needed and the intelligent polymeric sand requires only one watering. SUPERSAND G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Available in Beige and Slate Grey. Ideal for concrete paver, natural stones, wetcast prodcuts and clay pavers.

(FOR RESIDENTIAL AND COMMERCIAL APPLICATIONS)

GATOR MAXX G2 is made with a state-of-the-art manufacturing process. Specifically, calibrated sand is mixed with sophisticated intelligent polymers. This new generation of Intelligent Polymers neutralizes haze and dust. The polymeric sand application is now dust free and haze free. No blower is needed and the intelligent polymeric sand requires only one watering. GATOR MAXX G2 is recommended for a variety of uses including pool decks, patios, footpaths, driveways, parking spaces, pavements, etc. Available in Beige, Slate Grey, Ivory and Black Diamond. Ideal for concrete pavers, natrual stones, wetcast products and clay pavers.

Gator Nitro Joint Sand is a ready-to-use mixture of calibrated sand and resins which cure when exposed to air, hardening from top to bottom of the joint *. The product can be installed in wet or dry weather, in joints ranging from a minimum 3/16" (5 mm) to a maximum 2" (50 mm) joint width. The minimum joint depth is 1" (25 mm).

A high performance soil reinforcement product.

It is made with polyester yarns that have a high molecular weight and extraordinary tensile strength. These yarns are then knitted into a dimensionally stable network of apertures to form the geometric grid shape which offers tensile reinforcement to the soil in both the vertical and horizontal directions.

Gator Fabric GF3.5 Non-Woven Non-Woven geotextile is ideal for drainage, filtration and will allow water flow in a paver or retaining wall applications. Its staple fibers are used for soil separation and drainage. They combine high durability along with excellent physical and hydraulic properties. It is non-biodegradable.

Gator Fabric GF 4.4 Non-Woven geotextile is ideal for drainage, filtration and will allow water flow in a paver or retaining wall applications. Its staple fibers are used for soil separation and drainage. They combine high durability along with excellent physical and hydraulic properties. It is non-biodegradable and resistant to most soil chemicals.

Gator Fabric GF3 is a Spunbond fabric (Thermal, at-bonded) made of polyester that allows air and water to pass through and reach the plant. It’s formulated to resist deterioration due to exposure to ultraviolet light, mildew, non-biodegradable and is inert to commonly encountered soil chemicals. Gator Fabric GF3 is commonly used as weed barriers in landscape, planting bed, under mulch, decorative rock and has an expected lifespan 20 year.