PTA 422 Partition Top Anchor

Description

PTA Series Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below. PTA Series Anchors are suitable for construction using steel or concrete.

• Note: PTA Tube is not required with the PTA-422. H & B #NS Neoprene Sponge placed between the concrete block and the PTA-422 allows vertical expansion and contraction.
• FINISH: Available Pre-Galvanized, Hot Dip Galvanized or Stainless Steel.
• H & B provides engineering calculations for all standard PTA Series Partition Top Anchors upon request. Special high-load designs can be manufactured on a special order basis. Contact our technical department for information.

Spec Sheet